0 4 min 2 yrs
Jual Iphone XS Max Back Screen Protector Carbon Clear ( Antigores ...

The iPhone XS Max does not come with a screen protector. In reality, the body of this phone is protected by a silver bezel and glass surround. With the latest in advancements in engineering, this is the one thing that prevents the glass touch screen from shattering.

If you decide to pay your cell phone with protective cases, you’ll have to apply an adhesive to the front glass onto the backside of the telephone. This is the area that’s covered with the bezel and glass surround. In the event that you need to remove the cover in the front, then it’s possible to find one that will fit, but if you are going to do it yourself, then you want to follow some measures.

First, you want to acquire the instructions. Some will not incorporate any advice, but others might have them set out for you. IPhone 11 pro max screen protector It is best to find one that includes step by step directions for removing the cover and employing a screen protector.

Next, you need to take the phone aside. Remove the antenna in the trunk. Unscrew the 3 screws found on the right side of the motherboard. These are located at the base of the telephone and will require a screwdriver to remove.

Then, you want to pull off the protective case to expose the glass. If the glass is frosted over, then you want to use the identical approach to remove the frosting that has been used to protect the glass. At this time you can remove the screen protector that fits your cell phone.

Many times, you will need to thoroughly remove the screen protector, which will lead to a small amount of scratches. But if you find yourself with a new screen protector, then you will want to eliminate it before applying the glue to the screen.

Subsequently, you want to acquire an adhesive and apply it to the glass. Before you use the adhesive, you need to wash it. You can clean it with a dry cloth or you can use it as it is. After you are finished cleaning, then you can apply the adhesive to the glass.

After you have implemented the glue, you need to place the screen protector on the screen. To do this, you want to take the protective case and put it over the monitor. Be sure that the edges are facing up, but then turn it over so you are working together with the bezel and glass surround first.

Place the screen protector within the glass which isn’t coated with the bezel and glass surround. Next, set a bit of strain on the bezel with your fingers. When there is not sufficient space for you to put your fingers under, then you can make it bigger with your thumb.

Put the adhesive on the ideal side of the glass surround, together with the screen protector in between the adhesive and the cover. Use your fingers to push down on the adhesive to help it stick.

As you push the cover , you need to be certain you do not cause any scratches. Once you have properly placed the cover, you will want to gently push the bezel and glass encircle right into position.

Afterward, you need to peel off the adhesive to eliminate the backing that’s in the area and also to make it apparent. Next, you can carefully put the cover back over the bezel and glass surround. Now, you should remove the screen protector and also apply the glue to the rear of the iPhone XS Max.